Take the Next Step in Video
Step up to Digital RGB Fiber modem from Comm Port. It's the one digital fiber solution that gives you more capabilities over less fiber.
Fiber gives you greater signal integrity over longer distances - up to 2000m over multimode fiber and 20km over single-mode fiber. While analog transmission, principally using intensity modulation, is still common, analog signals are more prone to distortion and degradation than digital signals.
Multi fiber approaches are susceptible to synchronization and transmission latency deficiencies - small variations that degrade picture fidelity through problems with color convergence, shifting, smearing, and ghosting.
In contrast, Digital RGB Fiber modems use a single fiber provide precise color management, whether used directly or through a video matrix switch - plus CD-quality audio and keyboard and mouse functions.
Transmit RGB, Audio, Keyboard, Mouse - All On One Fiber
Most high-resolution video solutions require
three or more fibers to carry the color and sync
information. Additional fibers are required for
mouse and keyboard signals, bringing the total
fiber count up to five.
The Digital RGB Fiber modem carries video, audio, keyboard, and mouse on a single fiber. Compatible with all common RGB techniques, including RGBHV, RGsB, and RsGsBs, the modem allows great flexibility in achieving high-resolution video and broadcast-quality audio.
Features:
- Combine video, audio, mouse, and keyboard over one fiber
- Experience high-resolution video up to 1600x1200 @75Hz
- Slash the number of fibers per connection
- Simplify your cabling infrastructure
- Save space in equipment rooms
- Prevent signal degradation of audio and video
- Reduce installation and maintenance requirements
- Achieve maximum flexibility in placing video source and destination
- Works over standard single-mode fiber for up to 10,000 meters
- Works over standard multi-mode fiber for up to 1,000 meters
- Broadcast quality, 24 bit stereo digital audio transmission
- Supports standard PS/2 keyboard and mouse
- Supports bi-directional RS-232, up to 115K
- Supports all software platforms
- Status LEDs show integrity of fiber link
- Built-in diagnostics and front panel diagnostic lights
- Small form factor
- 12..24V AC/DC Power Supply
RGB Parameters:
- Video level: 0.7 Vp-p @ 75 Ohms, 1.0 V with sync
- Gray Scale Linear Distortion: <2%
- Pixel Intensity Distortion: <2%
- Linearity: +/-1.1%
- Maximum resolution is 1600x1200 @75Hz
- Connector: Standard VGA DB15
- Sync on Green or separate
- Color depth: 16 bits minimum, 24 bits maximum
Audio Parameters:
- High quality audio 24 bit stereo, 25 KHz, one direction
- Channel capacity: 1 stereo
- Input Impedance: 47 KOhm
- Output impedance: 50 Ohm
- Max Input level: 4.75 Vp-p
- Max Output Level: 5Vp-p
- Magnitude Freq. Response: 20Hz to 20kHz @ -3dB
- SNR (Weighted): >96dB @ 1 kHz
- Connector 3mm
Optical Interface:
- Fiber type: multi-mode or single-mode
- Number of fibers 1
- Fiber connector: ST or FC
Peripherals:
- PS/2 keyboard and mouse interface
- Bi-directional RS-232
Calibration:
- Video sampling frequency and phase manual adjustment
- Non volatile storage for calibration parameters
Physical:
- Power Supply: External, 12-24V AC/DC
- Power consumption: 5 W max for TX, 10W max for RX.
- Operating Temperature: -10° to +50°C
- Humidity: 0 to 95% RH, non-condensing
- Dimensions: 6x6x2”
View / Download our brochure here 
The compact Digital RGB Fiber modem operates with plug-in simplicity. Simply connect your video, audio, keyboard, and mouse connections to be up and running.
Applications:
- Plasma display screens
- Military C3 systems and C41 systems
- Air traffic control
- Trading floors
- LCD/DLP projectors
- CAD/CAM
- Hazardous-area touchscreens
- Theaters
- Stadiums
Available on 
GS-07F-0309U