Air-Gap Type / Patch Cord Type
Features
- Wide Attenuation range
- Environmentally stable
- Readily panel mountable
- Low back reflection
- Precision ceramic ferrule with end-face
- geometry per IEC proposal
Specifications
| Type |
Patch Type |
Plug-In Type | |||
| Connector Type |
SC,FC,ST |
SC, FC | |||
| Grade | N | N | A (FC Only) | S | |
| Applicable optical connector (Female to Male) |
UPC to UPC |
UPC to UPC | UPC to APC |
APC to APC |
APC to APC |
| Attenuation Variable Range (1310nm,1550nm) |
28dB |
28dB |
28dB |
28dB |
28dB |
| Minimum Attenuation Value |
1dB |
4dB | 1dB |
1dB | 1dB |
| Return Loss @ >4dB (Attenuation value) |
13dB |
13dB |
35dB~ 50dB |
>50dB |
>60dB |
| Resolution |
0.5dB | ||||
| Operation Temperature |
-15?~60? | ||||
| Storage Temperature |
-40?~70? | ||||
Ordering Information
| Fiber Type |
Type | Connector Type |
Grade |
Applicable Optical connector (Female to Male) |
|
| SM : 9/125 MM : 50/125 HMM : 62.5/125 |
PA : Patch PL : Plug |
SC FC ST |
N A S |
UU : UPC to UPC UA : UPC to APC AA : APC to APC |
|
Attenuators
Fixed Attenuators
Variable Attenuators
- Filter/Screw & Bending Type
- Air-gap type/Patch cord type
Available on 
GS-07F-0309U
